Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B21F component question 200

posted by  Maxspeed on  Sun Mar 18 15:48 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 20 21:55 CST 2014
[RELATED]

1979 B21F 242 GT N/A. There is a valve of some type that is located in the center of the intake manifold attached to the valve cover. This valve has a 2 prong connector on top and a hose, 1/2 in dia, attached to the middle of the base. The whole thing is about 4 inches long. I have the electrical connector connected but I do not know where the hose go to. The hose is about 1/2 inch diameter and is shaped like an S. I know it goes down the side of the block, but to where? This is not the cold start valve that attaches to the intake itself. Thanks,...Max:>)
--
Max..1989 244 DL 5 Spd., V15 Phase II Cam Bilstein HD, Turbo Swaybars, Poly Bushings all round, Turbo Wheels, Black leather interior, Electric mirrors, LED dash and gauge lights and now NEW ECODES with the turn signals, 1992 black 244 next project






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED B21F component question [200]
posted by  Maxspeed subscriber  on Sun Mar 18 15:48 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.