Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fog Light Switch Wiring 200



The fog lights are all in and wired, and I had only problem left to go; I wired in the fog light switch and light from separate fused 12v sources. This meant the switch worked, but the light was ignition=on.

That's not right,

so I re-wired the light in series with the 12v in to the switch. The fog light switch is running off fuse 14, so I only have fog lights when headlights are on, as OEM rear fog light. However, the switch light was headlight on = foglight switch on.

That's not not right either. So I'm thinking the power source for the light in the switch should be wired in series with the switch out to relay, so it's only powered when the switch is foglights = on. Right?

Sheesh. Is the last version the correct wiring procedure for the front fog light switch?

Thanks O Brickboarders,

Lanval






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fog Light Switch Wiring [200]
posted by  Lanval subscriber  on Sun Apr 29 18:39 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.