Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

89 245 need pin #'s at ECU for ECT connection pls 200 1989

posted by  Dgital D on  Sun Jun 10 06:27 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 27 11:46 CST 2011
[RELATED]

Anybody have the Pin #'s at the ECU connector for the ECT sensor ?

My Haynes manual lists up to 1990 on the cover, but unfortunately the schematics only goto 1986.

Car is running rich (black smoke) and won't idle well with the AMM disconnected, at least not once it is hot.
I'm trying to verify the ECT resistance values but so far haven't been able to pull off the ECT connector at the head and am not in a hurry to pull the intake manifold just yet. Would like to check it at the ECU as well anyway to verify the harness.

So.... if anybody can post the ECU pin #'s, and colour codes, I'd really appreciate it. (I see info in the FAQ for 700/900, but don't want to assume this is the same on my 245).

Thnx, Rgds, Dave.
(Yes, should have got the Bentley "a while" ago...)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.