Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need help interpreting brake booster test with vacuum pump 200

posted by  Dasein on  Sun Jun 24 14:07 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 18 00:34 CST 2011
[RELATED]

I was trying to check possible sources of vacuum leaks and thought to check the brake booster by hooking up a vacuum pump to the large hose that goes to the check valve. It would hold 12-13 inches of vacuum steady, but it would not allow me to pull anything above that with my pump (the pump easily pulls 25 inches of vacuum on a closed hose).

Is this what I should be seeing? Does the booster bleed off vacuum above 13 inches while maintaining a vacuum reserve at that level via the check valve? This is an 84 240.

Any help interpreting this result is much appreciated.
-John,
84 and 86 245s






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New need help interpreting brake booster test with vacuum pump [200]
posted by  Dasein  on Sun Jun 24 14:07 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.