Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AC Belt tension - keeps snapping 900

posted by  xluke on  Sat Jul 14 11:49 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jan 16 15:48 CST 2009
[RELATED]

Hello,
My AC belt, even w/o tensioning, is very taught, probably only 1/2 inch of play. This has resulted in 3 snapping on me. after loosening all 4 pivot bolts (or even 6 if I'm feeling crazy) and loosening the tensioner, I still can't loop the belt easily over the crank pulley. So, I get it most of the way on and give the engine a partial crank which forces it on. Then, w/ the tensioner bolt loose, I tighten all the pivot bolts. Its still tight! Can anyone suggest a slightly larger belt that still has the thick width? Or, some other solution?

BTW: this is a '94 940 w/ the A/C on its own belt.

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AC Belt tension - keeps snapping [900]
posted by  xluke  on Sat Jul 14 11:49 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.