Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 AC Switch 200 1984

posted by  jamez114 on  Mon Jul 23 20:17 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 20 21:43 CST 2009
[RELATED]

Hello All,

I had the dash panel unscrewed to install a radio and noticed that one of the wires coming from the microswitch (red/white) is not connected to anything. I don't notice the idle speed changing if I switch on the AC but I do notice that it seems the fan may always be on (always feel air circulating in the floor area). The car is running rough when it is first started up and not too great on gas so I'm wondering if the idle speed is stuck at the increased level?

I have a wiring diagram for an 85 out of a Haynes manual which I'm assuming is the same as an 84. Microswitch is number 213. Shows a red wire coming in from 107 (AC main rotary control switch) on one terminal. Other terminal shows two wires, one white/red going to 206 (switch, heater fan CU) and one red that goes to 214 (Control unit B23F LH-Jetronic 2). Seems that mine is not connected to whatever 206 is. I assumed 206 was the rotary fan blower switch but looked at the back and I don't see anyplace for a missing connection.

Anyone know what and where 206/"switch, heater fan CU" is?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 AC Switch [200][1984]
posted by  jamez114  on Mon Jul 23 20:17 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.