Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bushing replacement question for a/c compressor 200 1986

posted by  Xraybob on  Tue Jul 31 00:08 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:32 CST 2014
[RELATED]

The a/c compressor is sitting crooked and its belt is rubbing up against the p/s pump belt. I have the replacement bushings to do the a/c compressor, p/s pump and alternator. The latter 2 seem easy enough to remove, but I'm concerned about how to remove the a/c compressor. Will I have to disconnect the pressure lines and have it recharged? Is this something I can do myself or should I let the shop take care of this item? I usually feel I can tackle any project with enough information and planning ahead of time.

Thanks in advance for your input and ideas.
--
'86 sedan with 366K miles with original engine and automatic transmission






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bushing replacement question for a/c compressor [200][1986]
posted by  Xraybob  on Tue Jul 31 00:08 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.