Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

crank position sensor connections 900 1994

posted by  Vbro60 on  Tue Jul 31 09:36 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 23 12:43 CST 2007
[RELATED]

ALL MOST THERE!

First I'd like to thank Spook, Heat and the rest of yous for guidance in resolving a stall situation I posted several days ago. As suggested, a simply wiggle of the CPS cable and harness got me started. Unfortunately, after driving nearly 25 miles she stalled again as I made a left turn. The wiggle hasn't worked again!

Can someone tell me what the CPS cable is attached to at the female plug end. I'm thinking an engine or battery shift may be causing wires to toch in the harness. Cracks in the insulation have be detected. My hope is that by ensuring battery stability and replacing the deteriorated wires in the harness, we'll be just fine, until something else becomes my teacher!

Best Regards.

Vbro60 94 940 turbo wagon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New crank position sensor connections [900][1994]
posted by  Vbro60  on Tue Jul 31 09:36 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.