Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Broken rear R/H Torgue rod - Need new one 200 1982

posted by  nabramson on  Sat Sep 1 12:23 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 20 15:00 CST 2011
[RELATED]

A banging sound from my rear suspension turns out to be a broken r/h front rear torque rod.It is one of 2 torque rods that fit parrallel on each side of the rear axle. 79K miles ago I installed urethane rear bushings.Could this be an explanation for the failure ? The end that at the rear axle is the broken part.Would any body have one for sale? Preferably with the old bushings removed.
BTW is it safe to drive the car in the meantime? I see that the rear trailing arms should keep things in place in the meantime.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Broken rear R/H Torgue rod - Need new one [200][1982]
posted by  nabramson subscriber  on Sat Sep 1 12:23 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.