hello again, i am recovering from a blower motor job. installing everything back in place. the steering support needs to go in along with the dash support and dash its self. my battery keeps draining i disconnected it again and put a charger on it. i can move the wheel side to side, that is what caused the brake lights to stay on and drain my battery. also the cruse switch was stuck on. the switches won't hit the petal arm now caz the bracket is slightly bent causing the brakes and cruse to stay stuck on and not come in contact with the petal arm. it must be from me moveing the wheel to gain clearance to the blower motor i suspect. the next question is how can i get the switches to contact the arm? i can move the steering wheel back towards the right to get the switches to contact the brake arm. however. when i move the wheel back to the center, the switches come off the brake petal arm!! how can i fix this??