Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Why add oil to all A/C components? 200 1984

posted by  Boobrick on  Mon Oct 1 05:54 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 11 11:13 CST 2008
[RELATED]

I am about to install new compressor, hoses, evaporator etc... in my beloved 1984 245. Sticking with York piston compressor and R-12.
I am getting mixed signals on how much oil to put in the system but more confusing is Where to put it. The York manual says to add 10 oz. to compressor "sump". My mechanic said to "be sure and add oil to each new component as well"
On a compressor that is lubricated from the freon/oil mixture that circulates through the system, that makes sense. However, since the York has its own oil sump why add oil to other A/C components when there are no moving parts? i am assuming that the oil in the York "sump" does not get circulated throughout the entire system.
So.... to anyone who knows, do I add oil to all the new components? If so, how much to each?
Thanks, in advance, for your input






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Why add oil to all A/C components? [200][1984]
posted by  Boobrick  on Mon Oct 1 05:54 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.