Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

broken bleeder screws, bleed the ones that work, or leave it 200

I replaced my rotors and pads today and for sport I thought I would bleed the brakes with my power bleeder that I have used once. I sprayed them with PB, rapped them with a hammer but sure enough I broke a few off. All of the bleeders are closed and the pedal is fine. (dont know when the fluid was last changed) should I bleed the screws that are functional or just leave it until if/when I decide to change the calipers.

Thanks,

matt

--
'90 245 224k, '93 945 184k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New broken bleeder screws, bleed the ones that work, or leave it [200]
posted by  matt82dl  on Sat Oct 6 09:02 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.