Okay, Here's the deal. It's been awhile (too long!) and I need to complete my project. For those of you who haven't seen one of my many previous posts, I've been on a marathon project for the past 2+ years. I've been converting an '82 245 from a diesel engine to a gasoline engine setup. I went to try and start this thing awhile back with no luck and after some expert troubleshooting advice from the BB, I found that I have a bad ignition wiring harness. Now I have tried every resource (including Dave Barton) that I can think of and I can't find an updated ignition wiring harness for an '83 (that's what the donor engine is). I recently talked to my friendly neighborhood Volvo mechanic (he's the only one for like a hundred miles!) and he tells me that I can use one from an '88 240 and it will work and that they don't have the crumbling problem that the earlier ones did and that it has a better connector on it. So my question is this: does anyone here on this planet have one that they'd be willing to sell me for less than multiple appendages to which I have become strongly accustomed to? I would be deeply indebted if some one could help me out. Thanks in advance, Charles