When the tank is full, the gauge reads correctly, and drops appropriately to about 1/2 mark. But from there to a dry tank it's anybody's guess. The gauge will rise almost to full mark, you can see it actually move. Then it will drop. It might go below the 1/2 mark and heads towards 0, then head back towards 1/2. It basically has a mind of its own in the lower 1/2 of the tank.

Is the float stuck or is there some other known likely suspect cause?

thanks
Doug
--
'94 945t; '95 854 base; '05 S80 2.5T