Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Please let my no power to ECU thread die, and help me find the ground wires under the intake manifold? 200 1990

Many thanks to jbowser for helping me to discover my error. I was looking at the fuel injector ECU, not knowing that the ignition ECU was directly behind and slightly above it on the firewall (not on the exterior wall).

I have 11.73 volts to pin 6, continuity to pin 20, but no continuity to ground on pin 14. Bentley 280.11.4 says to check the ground wires under the intake manifold.

I see one yellow wire in a plastic clip attaching midway back (coming out of a red wrap)and a couple of other wires that look like they are attached to sensors.

Would someone please be my knight on a shiny (or grungy) keyboard and let me know what I'm looking for? I don't want to break something else, especially if all I've been looking for all this time is a bad ground.

Thank you to all who've tried to help so far!
ezsha
--
'84 244, Peter, never drove. Robbed to fix Paul, '86 244 - drove for 2 years; holey saint now, passing parts to Paul Jr, '90 244, now driving. Friends w/ '90 245, jokingly aka Mary, (pregnant sedan & completes PPM trilogy). Daughter to unnamed '90 745.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Please let my no power to ECU thread die, and help me find the ground wires under the intake manifold? [200][1990]
posted by  curiousheights  on Sun Dec 30 07:56 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.