Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sway bar links 700 1987

posted by  jmsh on  Fri Jan 11 03:54 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Nov 27 14:29 CST 2008
[RELATED]

1987 740, 277K miles, About one month ago I replaced all the bushings on the front suspension of my 740 including the top and bottom bushings on the front sway bar links. Yesterday, I heard a popping noise and inspected and found the front passenger side sway bar link had snapped. My question is, Is their a torque value for the upper and lower bolts on the sway bar links. Did I overtighten, I noticed my mechanic tightened both nuts such that the bushings were squeezed pretty good. I have an original stock sway bar and original struts which seem to be fine. I have ordered two replacement links for both sides from FCP and am waiting for their arrival for the repair. CLUNK'n in Tn.

Thanks JMSH






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sway bar links [700][1987]
posted by  jmsh  on Fri Jan 11 03:54 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.