Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

leak at oil cooler 900 1994

posted by  rstarkie on  Sun Feb 10 13:01 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

1994 944T 175K
I am in the process of stemming the flow of petroleum products from this 944 project car.

I put a seal kit in the distributor and replaced the rear main seal.

I found the oil cooler was a little loose when I replaced the coolant hoses and I thought that was the source of a small leak. After tightening it, however, it still seems to be dripping some oil. I would guess the next best candidate in that area would be the seal between the cooler and the base (opposite side of the cooler from the oil filter).

Has anyone here replaced that seal? It is probably about the same size as the one on an oil filter. Dealer item? Thanks.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New leak at oil cooler [900][1994]
posted by  rstarkie subscriber  on Sun Feb 10 13:01 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.