Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum leak check 900 1991

posted by  jotvolvo on  Mon Feb 18 03:27 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 12 08:43 CST 2009
[RELATED]

Hi all,
On 1991 940SE, I am planning to check the vacuum leakage using air pressure. As I read here I will apply air pressure from the hose by removing it from the AMM. Have to block the hose that goes to PCV valve. My question is that the air will be leaking through the IAC that is always some what open. Also may be through the throttle body plate. What about the turbo. Would someone guide me what is the proper procedure to detect the vacuum leakage using air pressure.
Thanks
Ram






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum leak check [900][1991]
posted by  jotvolvo  on Mon Feb 18 03:27 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.