Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Getting the crank bolt loose 200 1993

posted by  srburton on  Sat Feb 23 11:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 23 06:27 CST 2009
[RELATED]

I am having difficulty locating the access cover for the flywheel so i can keep it from turning while i loosen the crank bolt.
Not much room under there but if i look up near starter where would i look for that cover?
On my 740 i took the starter loose but on this 240 the starter is under the intake(no room to access)so i am assuming u have to come from under the car to
hold the flywheel .
any one shed some lite on this.
Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Getting the crank bolt loose [200][1993]
posted by  srburton  on Sat Feb 23 11:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.