Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Another way to let more air through the radiator 200

posted by  Stickbuilder on  Tue Apr 1 13:38 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 03:31 CST 2014
[RELATED]

This may have been covered before, but if so, I didn't see it. I got to looking at the air intake grille today, and all I could see were the two big horns in front of the condensor/radiator. I unbolted them, and drilled another hole in the center support (down at the bend) and rebolted the horns there. I didn't need to extend any wires, and was able to secure the wiring with an electrical tie wrap. The horns are still as loud as ever, and they don't contact anything but the center support bar. Best of all, there is nothing blocking the air path to the cooling system. I do have a screen installed behind the grille in honor of the Love Bugs that we get this month, and in the fall.

Bill
--
Those who beat their swords into plowshares, will surely plow for those who did not.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Another way to let more air through the radiator [200]
posted by  Stickbuilder subscriber  on Tue Apr 1 13:38 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.