Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Disc brake warp/ run out 200 1993

When I apply brakes above a light pressure, ie moderate to heavy, the steering wheel vibrates violently. I have checked for loose front suspension parts, but all seems OK.
Have changed from snow to summer tires with no change.
Car does not pull on braking and tracks straight.
Pulled right wheel and I can see side to side movement of the disc relative to the brake pads. When turning the disc by hand, I can feel it grab at one spot each revolution.
The discs look fairly new actually ( I have had the car only 4 months).
The wobble looks about 0.3 to 0.5mm .
It desperately needs front shocks and I guess this could be exacerbating the situation, but I have never had a 240 or 740 with a warped rotor, Volvo brakes are so great, and I don't brake hard ever!

Could this amount of run out be a problem? How would I accurately measure this? Could it be a mounting problem? If so, can the disc be measured off the car?

Ideas welcome.
--
84 242Ti IPD bars&springs, 89 745 16v M46 IPD bars, 89 744 16v M46 IPD bars, 90 745 AW70, 91 245SE AW70 IPD bars, 93 245 CLassic M47






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Disc brake warp/ run out [200][1993]
posted by  runwld2 subscriber  on Wed Apr 16 01:46 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.