Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Wheel Bearing Replacement 200 1993

posted by  Oleseahorse on  Mon Apr 21 03:45 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:45 CST 2014
[RELATED]

Hello All,

Could use some help. Apparently, the cage broke on the right front inner wheel bearing. The right front wheel was growling a bit.

I removed the wheel, disassembled the caliper and rotor and removed the castellated nut behind the dust cover. The hub was a little stuck and when I yanked it off, out came the outer bearing and a number of rollers from the inner bearing fell to the ground as a result of the cage being broken. I cleaned things up, but other than Fig 3 on page 770-2 of Bentley, I'm stuck as to how to remove the inner race of the inner bearing which seems to be firmly attched onto the spindle.

I could also use some help to make sure I'm calling the components by their right name. I realize that the hub has the outer races (which I'll have to replace also). Does each bearing assembly include the bearings, cage and inner race?

I could def use some help on this one. Thanks in advance,

Marty Wolfson






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Wheel Bearing Replacement [200][1993]
posted by  Oleseahorse subscriber  on Mon Apr 21 03:45 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.