Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2012 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Anything else good to do while replacing ball joints on a 940? 900 1993

posted by  Vladimir on  Thu May 8 10:19 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 5 18:40 CST 2014
[RELATED]

I am about to replace the ball joints on wife's 940 (almost 200K miles). After having received the parts from FCP (Moog brand) I thought there may be some other things that could use a replacement while I have the front end apart. I am really not familiar with suspension work so much. I have read the FAQ and the job does not seem too bad. The FAQ does not mention any other "good time to replace" parts, but what about the wisdom of the forum?

Thanks in advance!
--
Vladimir. '98 S70 base, 5-speed manual - his, '93 945 (approaching 200K miles and rolling on...) - hers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anything else good to do while replacing ball joints on a 940? [900][1993]
posted by  Vladimir subscriber  on Thu May 8 10:19 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.