Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2001

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 Wagon Anti-sway bars

posted by  spook on  Sun May 25 10:42 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:06 CST 2014
[RELATED]

Dear Fellow Brickboarders,

May this find you well. I just installed an IPD rear anti-sway bar on a '94 940 wagon. The FAQs were quite helpful!

Three issues:
(a) the factory installed rear anti-sway bar measures 16mm in diameter (the front anti-sway bar is 23mm). I had thought that the factory spec for the rear bar was 19mm. Is it not so, that the 16mm diameter bar is for a sedan (rear)?
(b) I installed a 25mm IPD rear anti-sway bar. Is is a problem to have that bar paired with a 23mm factory-installed front anti-sway bar? I have the 25mm IPD unit and will put it in, if there's a compelling reason to do so.
(c) when I removed the shock bolts - having first put a jackstand under the rear axle - I expected the shock absorbers to extend. They didn't. Is that a sign of failed shocks? The body rebounds pretty smartly, if I press down on the corner of bumper.

Thanks for your help. I'm much obliged.

Yours faithfully,

Spook






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 Wagon Anti-sway bars
posted by  spook  on Sun May 25 10:42 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.