Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Won't start after cleaning throttle body and replacing wires, cap, rotor 200 1985

posted by  jdeitner353 on  Thu Jun 5 15:34 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 5 04:21 CST 2009
[RELATED]

My 1985 244 DL won't start after replacing the wires, cap, rotor, and cleaning the throttle body.

I have gotten it to start twice this afternoon, in between maybe 30 cranks each time. Upon start, it will idle just fine, nice and low, for as long as I want. After I give it gas, however, it will sputter and die, and it won't start again.

It sounds good, so I'm ruling out the cap, rotor and plugs. I'm thinking that it's the carb cleaner that I sprayed into the throttle body and the intake manifold. But even that doesn't convince me, since it idles great once started.

Any ideas?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Won't start after cleaning throttle body and replacing wires, cap, rotor [200][1985]
posted by  jdeitner353  on Thu Jun 5 15:34 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.