Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Crankshaft bolt on my '79 will not come off. Tried "everything.' Seal leaks. Help. 200 1979

posted by  jgreenwood on  Tue Jun 17 15:56 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 11 19:10 CST 2011
[RELATED]

HI fellas. Daughter two crept home with oil and tranny fluid leaking from her '79 242 flathood. She took my '88 until I can put new seals in front and in the ranny.
No problem with replacing the camshaft seal or the intermediate. But I cannot figure out how to hold the belt sprocket stationary and loosen the crankshaft bolt. It is lefty loosy counterclockwise, right? Never done this one before. I know on the '85 to '93 240's ipd sells a gizmo to hold things still while the nut is loosened. Nothing for the '79. Alas. Any tips would be appreciated. I tried visegrips, wedging a screwdriver into on of the belt slot up again the water pumps. No joy. Help. jg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankshaft bolt on my '79 will not come off. Tried &quot;everything.' Seal leaks. Help. [200][1979]
posted by  jgreenwood subscriber  on Tue Jun 17 15:56 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.