Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need Part Numbers Dealer Can't Find - '90 240 200

posted by  RicoS on  Sat Jun 28 03:15 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 02:18 CST 2014
[RELATED]

As I said before on this forum, if you keep a 240 long enough, you will have to replace parts which you never knew could wear out.

I have to renew the front brake backing plates on a '90 240. In changing the backing plates, I also have to replace what I would call the "flange ring" which mounts on top of the backing plate. This flange ring is a stamped metal part which is about 5 in. (130mm) in diameter on the OD, 3 in. (80mm) on the ID with a collar about 5/8 in.(15mm) high on the ID.

Also, I need the spring C-clips which are mounted on both ends of the front brake hoses.

I called a dealer and he can't find part numbers for either of these two items. Perhaps they are part of an assembly. Can anyone tell me the part numbers for these items?

If anyone has a pair of un-rotted-out front backing plates with the "flange rings" for sale, I would very much like to buy them.

Thanks, one and all,

Rich






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need Part Numbers Dealer Can't Find - '90 240 [200]
posted by  RicoS  on Sat Jun 28 03:15 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.