Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do i need to power Bleed 200 1991

posted by  Kenner on  Sat Jun 28 16:12 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 24 15:42 CST 2014
[RELATED]

Replaced a seized FL caliper. Wasn't smart enough to block the pedal down. During re-attachment i lost to much fluid and the reservoir went empty, only for a second but definatley empty.
I have manually bled the entire system correctly, in order etc, 4 times now yet the pedal is still soft. Too soft. I surely have air trapped somewhere. Or is it something else?
Can I get the air out or do i need to power bleed?
I have pushed over 2 litres fluid through the bleed valves so far.
The brakes were always excellent with this lower inner piston over the years getting more and more seized to the point where i decided it was time to change.

Input appreciated
--
420,000KM and still ticking






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Do i need to power Bleed [200][1991]
posted by  Kenner  on Sat Jun 28 16:12 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.