Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

900 oil pan gasket replacement 900 1993

posted by  cvandor on  Mon Aug 11 15:38 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 10 18:45 CST 2013
[RELATED]

Hello,

I just dropped the oil pan on my '93 945T to replace the oil pan gasket.
I was surprised at how little the pan dropped down, even tho I removed the little runner block from under it that was bolted to the crossmember.
I have several qustions:
-Is it possible to install a one-piece oil pan gasket by sliding it under the oil pump inside the pan? I already have one, and now I realize thy make 3 piece ones to make installation easier.
-Is it possible to unbolt the oilpump, let it drop into the pan, and the remove the pan? I've done this with other cars. Would be nice to inspect the bearings.
-If not, can I unbolt the motor mounts and lift the engine by the bellhousing and drop the pan that way?
Thanks in advance,

Csaba
'93 945Ti, euro headlights, ipd sways






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 900 oil pan gasket replacement [900][1993]
posted by  cvandor  on Mon Aug 11 15:38 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.