Shifter is sloppy. The aft bushing is gone. The front bushing still appears to be tight. I may leave that alone. I ordered the kit from FCPGroton today. The pictures of the kit puzzles me. I think I have only 2 locations for the donut bushings but what replacement parts go on the aft location, where the lingage attaches to the shifter arm coming down from the console? Also, the FAQ talks aout removing the 2 nuts to replace the bushing. Is that required? It looks like I should be able to remove the c-clip & pull the pin out, replace bushing & reintall. thanks for any help.