Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2013 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Radio stopped with a pop 700 1987

posted by  SpazMan on  Fri Sep 5 11:20 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 14 21:06 CST 2012
[RELATED]

Hi folks,

I was rockin' to my Kenwood system which I recently rewired and replaced a blown speaker on. I had it turned up enough so that I could not hear the engine noise, and the volume read -16 (zero is the highest volume).

The music stopped with a POP and all was silent. I tried the normal stuff (turn it off, turn it on, toggle volume/loud/ATT/mixer). The little screen lights and behaves like normal.

I observed a separate fuse (25A) on the back of the unit when I removed it, and found that the fuse block in the dash had a 25A fuse for the radio, and I replaced the fuse block fuse with the proper 15A fuse. Would a blown (or compromised) fuse have caused this condition - no volume, but otherwise operational?

My other theory is that the amp inside the unit failed. But that would be sad. :(

Ari






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Radio stopped with a pop [700][1987]
posted by  SpazMan  on Fri Sep 5 11:20 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.