Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Speedometer Retaining Threads Stipped 200

posted by  AppleTech on  Mon Oct 6 20:01 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Nov 13 14:40 CST 2011
[RELATED]

So the threads for the bolt that holds the speedometer cable into the trans is stripped on my M46. I was wondering if anyone had an thoughts on how to fix this?

One thought I had, and it may work depending on how the trans is designed, would be to simply drill it through and put a nut on the top and run the bolt through... would this work? I don't know if there are any internals on the other end of the retaining bolt or if that portion of the transmission exists only to retain that cable?

Thanks,
Phil






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedometer Retaining Threads Stipped [200]
posted by  AppleTech  on Mon Oct 6 20:01 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.