Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Poly Endlinks 120-130

posted by  RepairmanJackal on  Sat Oct 18 11:45 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 10 09:52 CST 2014
[RELATED]

Has anyone had installation issue with the blue poly endlink bushings?

I have a set of 8 and when I went to installed them, I found that they were a bit taller than the stock rubber bushings. The consequence was that I could not put the endlinks back together with poly on both ends. I was able to get one set of polys on, but I had re-use the rubber bushings on the top.

Is this normal? It's probably not a big deal to shave a little length off the tubes or to use a longer bolt but it seems weird that I'd need to modify my suspension parts to use poly endlink bushings. There's no mention of required mods in the IPD catalog or website.

Thoughts and/or experiences?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Poly Endlinks [120-130]
posted by  RepairmanJackal subscriber  on Sat Oct 18 11:45 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.