Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2021

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Leak on B230

posted by  Duck on  Tue Oct 28 03:02 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 30 21:00 CST 2014
[RELATED]

It appears that there is a oil leak where the aluminum head meets the cast iron block at the front of engine and seeps onto the water pump and front of engine. It is oil and not antifreeze.
The camshaft seal was replaced not long ago and the oil isn't coming from there when I pull back the plastic guard and look behind it at the camshaft seal, it's dry.
Also , the valve cover gasket area is dry.
Any ideas where it's leaking?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Leak on B230
posted by  Duck  on Tue Oct 28 03:02 CST 2008 >
  • New Oil Leak on B230
    posted by  someone claiming to be JimmyJohn  on Wed Oct 29 15:01 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.