Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

YES! The 93 heater valve is different 200 1993

posted by  runwld2 on  Wed Oct 29 14:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 13:11 CST 2014
[RELATED]

I recently inquired on the board if anyone had any experience with a leaking heater valve on a 93 240. Many wrote back pointing out it's location above the throttle pedal. This is how the Bentley manual depicts it also. But the one on my 93 is quite different. There is obviously a leak here (seen in photo).
FCP does not mention this different valve either.
I'm not even sure how to remove the valve, as the other hose, which I assume goes to the heater core, is on the other sider of the valve, buried under the fan case.
Anyway, here it is, different from what we all think it should be.

Here is a shot of the heater valve on my 93 245 Classic.
93 heater valve

This is taken from about the position of the driver's right foot, looking towards the right side of the car. You can see the vacuum resevoir on the right side of the photo.
--
84 242Ti IPD bars&springs, 89 745 16v M46 IPD bars, 89 744 16v M46 IPD bars, 90 745 AW70, 91 245SE AW70 IPD bars, 93 245 CLassic M47






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New YES! The 93 heater valve is different [200][1993]
posted by  runwld2 subscriber  on Wed Oct 29 14:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.