Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

FWD wheels on my '84 240 200

posted by  coach on  Tue Nov 18 17:12 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 18 19:11 CST 2011
[RELATED]

Okay, so I sprung for a set of wheel adapters from one of this board's advertisers, 5x108mm bolt pattern 25MM width for the front and 32mm for the rear. I am using 15" wheels just like the ones displayed in Strong-pimp-hand's post at: http://www.brickboard.com/RWD/volvo/1128005/220/240/260/280/850_wheels_240.html%0A

When I removed the front wheel I find two little machine screws with 10mm heads sticking out of the face of the wheel hub which prevents the adapter from fitting flush against the face of the wheel hub. Did I purchase the wrong kind of adapters? Do these two little screws perform some vital attachment function? When I remove them the hub feels a little loose.

As always, thanks for the great advice.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New FWD wheels on my '84 240 [200]
posted by  coach  on Tue Nov 18 17:12 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.