Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

por15 question 140-160 1971

posted by  1966-estate on  Wed Jan 21 18:47 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 30 13:50 CST 2014
[RELATED]

I have to do a bit of POR15 work on the inside of the floor in my 142 and had a quick question, the instructions are pretty clear and I know the stuff works great in damp wet conditions.

What about the cold? I'd like to hit some surface rust spots on the inside floor pan, I've cleaned them up with a wire wheel and grinder but would like to por15 them before I put down some sound deadener. The temp has been anywhere from +2 to -10 c. so far this month, I have a good heater but thought I'd ask before going ahead. I'd like to get the inside taken care of so I can swap the interior into the 70 shell and start taking apart the wrecked one. Maybe by late spring early summer I'll have a 142 to drive again!

Cheers
Chris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New por15 question [140-160][1971]
posted by  1966-estate  on Wed Jan 21 18:47 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.