Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Torque on the center nut for the transmission mount 900 1991

posted by  mike940T on  Sat Jan 31 03:55 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 2 12:45 CST 2011
[RELATED]

I'm installing a new transmission mount today, and I wanted to make sure I tighten the center nut (the one that goes on the long threaded rod from the transmission) appropriately.

I actually replaced the mount about 6 months ago when I replaced my motor mounts. I don't know if I installed it incorrectly or it was just a cheap part (aftermarket from FCP Groton) but it failed. I took it out recently when I noticed a vibration and the rubber had started to separate from the metal. I now have an OEM part, and I want to make sure I install it right.

Thanks,
Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Torque on the center nut for the transmission mount [900][1991]
posted by  mike940T  on Sat Jan 31 03:55 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.