Hello I'm new to the site, but not to the world of mechanics.
However I'm having trouble with my 1986 245. It was running fine, but then I decided to take the engine harness out to rebuild it. I did so and now I have no power to the fuel pump. I can jump terminals and here the pump run so I assume the wiring isn't broken. I've replaced the relay, still no start. Thinking I may have fried the brain I pulled a new ecu from a parts car, still no start. I have great spark, the main 25amp fuse is good. The fuel pump fuse (#6 i believe). I don't know what my next step is. Should I have power with the key on engine off (koeo) or is it only when it cranks?
Thanks for your help.
-Clark
|