Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timming belt counterhold tool and seals 200 1989

posted by  chilliwack on  Sun Feb 8 09:26 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 11 07:54 CST 2014
[RELATED]

Need some advice
1.Counterhold tool when put on turns tdc off a little is that normal?

2.Do I need to remove valve cover to change out cam seal?

3.What else besides cam gear needs to be removed to put new back cover on for
timming belt cover?

4.Have checked flame trap componets seem ok ,

5. How do I change out intermediate seal ?

6.How do I know intermediate is lined up cannot seem to see mark with bottom cover on.

Thanks in advance






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timming belt counterhold tool and seals [200][1989]
posted by  chilliwack  on Sun Feb 8 09:26 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.