Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Small Part Needed (Witts End) 1800

posted by  rdbrown on  Thu Feb 12 02:00 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 18 11:41 CST 2009
[RELATED]

Dana 30 differential used in 1800's, 122's, and maybe 140's 1968 and onward. There's a small cylindrical " Slug" about one inch in length and diameter that has an oblong hole thru it. Volvo refers to it as a spacer block. The Cross Shaft that connects the two free pinion gears passes thru it. Anyone have this "Slug" and or Cross Shaft? Dana Corp is of no help, and the Usual Suspects are comming up blank. Everything is ready for reassembly and this has stopped me cold. Help. Rich B.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Small Part Needed (Witts End) [1800]
posted by  rdbrown  on Thu Feb 12 02:00 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.