Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2012

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 rear brake hose lock nut size

posted by  tmcnulty1982 on  Sat Feb 14 05:22 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Feb 20 08:05 CST 2012
[RELATED]

One of the rear brake hoses on my '83 240 was clogged so I took it off to replace. The lock nut was /extremely/ difficult to remove and I ended up destroying the threads on the old hose and the nut during extraction.

When I picked up the new hose today I was disappointed to discover that it does not come with a new washer and nut. Does anyone know the size and TPI of this nut? The guys at NAPA had no idea what it was nor where to find it, short of pulling one from the junk yard (unfortunately junked 240s are in short supply around here).

For reference purposes here is the hose in question:

http://www.fcpgroton.com/product-exec/product_id/1126/nm/1983_1984_Volvo_240_Rear_Brake_Hose/category_id/45

Thanks all.

Toby






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 rear brake hose lock nut size
posted by  tmcnulty1982  on Sat Feb 14 05:22 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.