Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2011 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

HEATER CONTROL VALVE 120-130 1965

posted by  Dorky-White-Guy on  Mon Feb 23 09:58 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 30 10:14 CST 2009
[RELATED]

Good afternoon, I just received my HEATER CONTROL VALVE from IPD and cannot determine how the inner wire from the control cable on my dash (I have 3 sliders on the dash) connects to the valve. The one I removed had a set-screw anchor for the inner wire. Am I missing something or do I have to do some fabrication? Also, I cannot find anyplace for the capillary tube to be inserted. The one I am replacing was wrapped around a plastic loom and was just hanging out in the open. Thanks for any advice. Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HEATER CONTROL VALVE [120-130][1965]
posted by  Dorky-White-Guy  on Mon Feb 23 09:58 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.