Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to Remove Head Bolts? 200 1992

posted by  Dan Marino on  Fri Mar 6 15:08 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

Hi Folks,

I've got the cam out and the 8 valve thingy things all labeled in order. Looks like there is some deteriorated rubber bits around the valve springs. Not quite sure, but think the Erling kit I got for the head gasket includes the new rubber bits.

Anyway, I'm having a bear of a time breaking loose the head bolts. I've got a breaker bar and can't budge them.

Any advice for how to get these things un-torqued?

Is it ok to use an air tool impact wrench?

Thanks for the help.

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to Remove Head Bolts? [200][1992]
posted by  Dan Marino  on Fri Mar 6 15:08 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.