Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Idle Air Control: Good, Bad, or Ugly??? 200 1985

posted by  Dukester on  Mon Mar 16 10:06 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:55 CST 2014
[RELATED]

It's my '85 244 M46 210K. I had recently posted about the high idle problem and I think the culprit was the IAC. This is what I did. With warm engine off I covered the IAC intake nipple on the TB flat area with plastic and replaced the IAC intake hose. Then I started the engine and set the idle to 750 with the black idle thumb screw whereupon it idled fine and steady. Then I removed the IAC hose and plastic and then the engine stalled. I replaced the hose and started the engine and the idle shot up to 1200.

Q 1. Does this not implicate the IAC?
Q 2. Is there any other way to test the IAC to confirm?

Unfortunately for me I'm still ignorant of how to test with meters and such. I've gotta learn how.
Thanks for all your help, everyone.
Dukester






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Idle Air Control: Good, Bad, or Ugly??? [200][1985]
posted by  Dukester subscriber  on Mon Mar 16 10:06 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.