Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Drill/machine flywheel sensor holes ? 700 1990

posted by  Devil on  Tue Mar 24 05:51 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 29 10:10 CST 2009
[RELATED]

Has anyone drilled/machined the series of holes around the perimeter of a flywheel to make it suitable for a later model crank angle sensor motor ?. What diameter/dept/location are these holes. Are the holes flat bottom or tapered from a drill ?. I have an auto 1990 740 turbo and am planning to convert to manual using a 1989 740 turbo donor car I purchased which does not have the sensor cutouts. Any information would be appreciate as I am unable to source a compatible flywheel.
Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Drill/machine flywheel sensor holes ? [700][1990]
posted by  Devil  on Tue Mar 24 05:51 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.