Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

valve cover gasket 200

posted by  BonesandFeathers on  Wed Mar 25 17:05 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 4 00:36 CST 2014
[RELATED]

You'd think by now getting a simple thing like a valve cover gasket would be a walk in the park. I'm guessing I could buy an UZI with less trouble than I have encountered in the last 24 hours.
the cam seal was indeed gone as you all suggested. I found a place a little ways from here, that had a couple, and he only hurt me a little. I figured if I got the seals for under 20$ and could have my life back it was a good day. Well the rear seal popped right in, and of course the Autozone sold me the wrong Gasket, turns out everywhere I went I got the same wrong gasket. I went to FPC Groton and the site refused to even show me one.
I need a gasket with a half circle on each end , sorta like a pan gasket has an accommodation for the crank seals. Any body here got a number, or a better way to I.D. the bugger.
I'm on the bus till I get a gasket.
Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New valve cover gasket [200]
posted by  BonesandFeathers subscriber  on Wed Mar 25 17:05 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.