Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pressure sender location - does this seem like a good idea? 700

posted by  SpazMan on  Fri Apr 17 06:02 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 14 21:06 CST 2012
[RELATED]

Hi folks,

I've got an issue here that I need some advice on. The oil pressure sender for my Sunpro gauge is huge - much larger than I would have thought, given what it does. I am attempting to mount it in the front-facing oil galley plug hole, which is conveniently 1/4" NPT. I have not yet taken the plug out, because simply holding the sender in that spot makes me keenly aware of how close the water pump pulley will be to the sender. I'm not even sure that the sender will clear the power steering bracket.

If I can get it in, is it at all wise to have the sender in that location? I would zip tie the sender wire to the side of the sender to prevent it from being caught in the belt, and run it underneath the exhaust manifold parallel with the idiot light wire.

Thanks,

Ari






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil pressure sender location - does this seem like a good idea? [700]
posted by  SpazMan  on Fri Apr 17 06:02 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.