Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

oil adaptor leak 700

posted by  RobCooper on  Mon Apr 20 17:34 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 13 17:31 CST 2014
[RELATED]

All right, finally found the slow leak under adaptor bolt head with washer and the face of adaptor to face of block.

Every thing else is dry down stream. I don't want to take anything else apart.

Question: All I need is 1 new o ring #967343 between adaptor and block; and new crush washer #3531702 that goes under adaptor bolt head?

FCPgroton, IDP and VLVworld don't seem to have the washer? Where to get?

What is the torque for the bolt?

I can get access from the side of the engine under the P pump to remove the bolt. I will use a swivel extension. I was just going to remove this bolt and the hex head support screw down stream next to the cooler. Slide the adaptor away from block and put in the new o ring, new bolt and washer and torque.

Am I missing something?

92 745 Turbo






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil adaptor leak [700]
posted by  RobCooper  on Mon Apr 20 17:34 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.