Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2016 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

front suspension arm bushings - how hard 900 1994

posted by  someone claiming to be gen940 on  Fri May 1 11:52 CST 2009 [RELATED]

Hello gang

thinking of doing the three front bushings on my 94 940 (189,000 miles). I've done the conical ones before but want to tackle the other two.

Will a vise and a proper diameter piece of pipe or sturdy copper pipe be enough to push these bushings out. Is the fit a very tight press fit? If I do get the old ones out will pushing in the new ones be more of a struggle?

Might I be asking for trouble? I could afford to get them done by a shop but have the bushings already and thought to do them anyway.

I've got only a HD vise to work with, and the appropriate steel spacers and diameter pipe.

Thank you all in advance

gen940, 1990 240 previously, and now 1994 940 (wonderful cars!)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New front suspension arm bushings - how hard [900][1994]
posted by  someone claiming to be gen940  on Fri May 1 11:52 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.